Payment & Shipping Terms:
|Applicant:||Water Treatment, Air Clean||Methylene Blue:||120-240mg/g|
|Adsorbent Variety:||Activated Carbon|
|Packaging Details:||25kg plastic bag with inner lining,
1 MT jumbo bag with pallet ,
according to customer requirements.
|Delivery Detail:||Shipped in 0 days after payment|
Coal-based activated carbon is made of high quality anthracite coal and tar as raw material, adopt advanced processing technology. Appearance is black unshaped granular. Have developed porosity, large specific surface area, strong adsorption capacity, high mechanical strength, easy to repeated regeneration, low cost, etc. It is widely used in toxic gas purification, waste gas treatment, industrial and domestic water purification treatment, solvent recovery, etc.
1.High mechanical strength.
2.Developed pore structure.
3.Large specific surface area.
5.High adsorption capacity.
6.Endure high temperature and high pressure.
7.Not easily broken.
8.Durability and renewable.
Mainly application of classification:
Mainly of granular activated carbon water purification, it can not only remove the peculiar smell in water,
color, and but also remove organic or inorganic impurities, achieve the purpose of sterilization, mainly
used for cold drinks, food industry, pharmaceutical industry, power plant and other industries are also
used for water purification, industrial water and wastewater purification, can also be used for toxic gas
purification, waste gas treatment, solvent recovery.
|Iodine value||800-1000mg/g||Filling density||0.45-0.55g/cm3|
|specific surface area||900-1100m2/g||Alkali content||≤10%|
5/50 kg plastic woven bags or paper bags.
One ton bag with one pallets, Can also according to customer requirements.
Matters need attention:
1. The activated carbon, in the process of transportation, should prevent mixing with hard material.
do not step on it, in case of carbon particle breakage, affect the quality.
2. Storage. It is groove adsorbent, so in the process of transportation storage and use, it should
absolutely prevent water immersion, because once flooding, a lot of water is full of activity space,
the activated carbon will lose its effect.
3. Prevent tar material. In use process, should be prohibited from tar class material to the activated
carbon bed, lest jam activated carbon, lose its adsorption.
It is better for decoking equipment to purify the gas.
4. Fire. Activated carbon during storage or transportation, avoid direct contact with fire, in case of fire,
into the oxygen and regeneration completely avoid when activated carbon regeneration, regeneration
after have to use steam cooling down to under 80 ℃, otherwise the temperature is high, meet oxygen,
activated carbon combustion.
A: Your inquiry related to our products or prices will be replied in 24 hours.
B: Strict quality control and fast delivery .
C: Best quality and competitive price.
D: We can provide free samples, or provide the products according to customers' special requirements.
E: 10 years of experience in manufacturing and sales.
1) How can I place order?
A: You can contact us by email about your order details, or place order on line.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T and L/C,Paypal, Western Union are the most usual ways we are using.
3) What's the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
4)How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
5)How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.