SA Series  flotation cell is widely used for separating non-ferrous metal, black metal, noble metal, non-metal mineral, raw body and materials of chemical industry, which are subject to roughing and scavenging of large and middle scale flotation plants.

Advantage

Breathe in high volume, low power consumption

Spare parts have long use life

Each tank with suction, suction pulp and flotation triple function, its flotation circuit, without any auxiliary equipment, the level of configuration, easy to change in the process

Mineral slurry cycle reasonably, which can minimize coarse sand deposits, is advantageous to the coarse mineral flotation.
The mineral slurry has self-control device, convenient adjustment.

Working principle

SA type flotation machine impeller rotates, the fluctuation of the impeller chamber under the action of pulp in the upper and lower blades generate centrifugal force is flung around, make up and down the impeller chamber form a negative pressure zone.At the same time, the upper cover plate of the circular hole drawn into the pulp after the cover on the impeller chamber, formed on the pulp cycle.To throw the blade pulp, its lower pulp to complement to the center, forming the next cycle of pulp.And the suction pipe, center air cylinder is sucked into the impeller chamber, blended with inhaled pulp, forming a large number of tiny air bubbles, steady flow through the cover board, evenly dispersed in the groove, form the mineralized bubbles.Mineralized bubbles rise to the foam layer, scrape by scraper is the foam products.

XJM-SA series of flotation machine have many advantages such as big capacity, quick

running and good effect. There are six specifications including SA4, SA6,SA8,SA 10, SA12,SA16.

Also, we can make XJX-T XJZ, and XJQM-14 deep-trough gassing type flotation machine. Among them, XJQM-14 type and XJM-sl6 type have been awarded the prize of Scientific Advanced Achievement and Famous Brand Products by the former Ministry of Coal Industry and Anhui Province.